Engine Mount, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Audi S3, 2023 Audi RS 3, 2023 Audi A3 Quattro, and 2023 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace bolts that were tightened with an additional turn after removing them.

-- Check the adjustment of the subframe mount. Refer to ASSEMBLY MOUNT, CHECKING ADJUSTMENT .

-- Only remove the engine support, when the assembly mount bolts are tightened to tightening specification. Refer to ENGINE, SUPPORTING IN INSTALLATION POSITION .

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .