Control Module/Amplifier For Digital Sound System, Removing And Installing, MIB 2+: Removing

-- Raise the front seat into its highest position and then move it all the way back.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the floor mat from the vehicle.

-- Remove the expanding rivets -2- and then the cover -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connector -2- from the Digital Sound System Control Module -J525- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps :VAS 6223/9  -1- onto the MOST bus connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the connector -3- from the Digital Sound System Control Module -J525- -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -4- and pivot the Digital Sound System Control Module -J525- -1- toward the rear out of the bracket.