Night Vision System Control Module -J853-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2025 Audi SQ8, 2025 Audi RS Q8, and 2025 Audi Q8. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Lay the carpet at the left front of the center console. Refer to CARPET, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the -direction of the arrow A- and remove it.

-- Release and disconnect the connectors -3-.

-- Remove the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.