Main Relay
Turn ignition switch to OFF position. Disconnect main relay (in control box at right or left shock tower). Perform voltage tests at relay connector as indicated in MAIN RELAY TESTS table. Correct any problems found. If voltages are as specified, replace main relay.
MAIN RELAY TESTS
| Measure Between | Correct Voltage | If Voltage is Incorrect | ||||
|---|---|---|---|---|---|---|
| No. 6 & Gnd. | Battery | (1) Battery | ||||
| No. 8 & Gnd. | Battery | (1) Battery | ||||
| No. 6 & No. 4 | Battery | (2) MCU No. 36 | ||||
|
||||||