FixVault
Home › BMW › 1995 › 325is Automatic › Repair and Diagnosis › Engine Performance › Remove, Overhaul & Install › Engine Controls - Remove/Install/Overhaul › Fuel System › Throttle Body › Removal & Installation

Removal & Installation

  1. Remove mass airflow sensor. See MASS AIRFLOW SENSOR . Disconnect accelerator and cruise control cables from throttle body.
  2. Loosen hose clamps and remove hoses attached to bottom of throttle body. Disconnect throttle position switch connector. Remove 4 bolts, throttle body and gasket. To install, reverse removal procedure.
About FixVault