REPROGRAMMIMG Trans. Control Module Not Possible (24 01 99)
Publication date: 1999-05-01Reference number: 24 01 99
REPROGRAMMIMG TRANS. CONTROL MODULE NOT POSSIBLE
TECHNICAL SERVICE BULLETIN
Reference Number(s): 24 01 99, Date of Issue:
May, 1999
REPROGRAMMING OF TRANS. CONTROL MODULE MAY NOT BE POSSIBLE
Model(s): BMW E38 - 740i/iLA with M62 engine produced as of 9/98
BMW E39 - 540iA/iTA with M62 engine produced as of 9/98
Group: 24 - Automatic Transmission
Bulletin No.: 24 01 99
Date: May, 1999
SITUATION
Reprogramming procedure can not be performed and the following error message is displayed:
"ME 7.2 - Programming cannot be performed correctly! Test code 002400 Repeat programming if necessary."
CAUSE
DSC 3 control module is disturbing the communication path between the DIS/MoDiC and the DME and/or EGS modules.
CORRECTION
The power supply to the DSC 3 module must be removed prior to beginning the programming operation.
Remove the following fuse(s) which supply power to the module:
POWER SUPPLY FUSES
| Model | Fuse | Location |
|---|---|---|
| E38 - 740 | 17 | Engine Compartment |
| E39 - 540i/iA/iTA | 17, 31 | Glove Box |
| E39 - 528i/iA/iTA | 17, 31 | Glove Box |
WARRANTY INFORMATION
Information Only.