Programming The Integrated Universal Remote Control

To program a channel button with the signal of the original hand transmitter, proceed as follows:

1. Ignition lock position (terminal 15).
2. For initial operation, proceed as follows: press the two outer buttons (1) until the indicator lamp (on the left of the program button) begins to flash, then release the buttons. The three channel buttons are cancelled.
3. Hold the original transmitter max. 5 cm (2in) away from the channel buttons.
   Fig 1: Identifying Integrated Universal Remote Control Buttons

   Courtesy of BMW OF NORTH AMERICA, INC.
4. At the same time, press the transmit button on the original transmitter and the desired channel button on the integrated universal remote control. Release both buttons when the indicator lamp begins to flash quickly.
5. To program additional transmitters, repeat steps 3 and 4.