Procedure For Setting/Changing The Date Format (62 02 05)
Publication date: 2003-05-01Reference number: 62 02 05
PROCEDURE FOR SETTING/CHANGING THE DATE FORMAT
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI B 62 02 05, Date of Issue:
May 2003
| BMW: | E90 (3 Series) without Navigation system. |
| GROUP: | 62 - Instruments |
SUBJECT
Procedure for Setting/Changing the Date Format
INFORMATION
This procedure describes how to select or change the "Date Format" (mm/dd or dd/mm) in the "Personal Profile" settings.
PROCEDURE
- Press the rocker switch in the direction indicator stalk, up or down until the "Personal Profile" function (key with a check mark) appears, accompanied by the word "SET", in the instrument cluster.
- Press the BC button on the steering column stalk.
- Press the rocker switch, up or down, until "tt/mm" or "mm/tt" is shown.
- Press the BC button on the steering column stalk.
- Use the rocker switch to make the selection/change.
- Press the BC button to confirm and accept the selection/change
This will also change the "Date Format" in the radio (RAD2) display.
The following display formats and units of measure can be selected/changed in the same way.
- Fuel consumption (l/100km, mpg, km/l)
- Distance (km, mls)
- Time format (12h/24h)
- Temperature (deg;C, deg;F)
- Reset of display formats and units of measure (factory/default setting)
For more information on Personal Profile, please refer to the Owner's Manual.