Slide/Tilt Sunroof: Initialization: Procedure: Notes
NOTE:
The control button must remain pressed during the entire initialization procedure. The initialization procedure must be repeated if the button is released.
Initialization is performed as follows:
- Press and hold sunroof button in sunroof "tilt" direction
- After approx. 15 s, the initialization run starts in the "tilt" direction and stores the end position
- The slide/tilt sunroof is closed after 5 s in the "tilt" position
- The sunroof is then opened and the end position stored
- The sunroof is then closed and the end position stored
Time required for initialization approx. 120 s.