Camber Adjustment: Rear

Replace hexagon collar nut (1). Ensure eccentric washer is correctly located (2). See Fig 1. Tighten hexagon collar nut (1) to specification. See TORQUE SPECIFICATIONS .
Loosen hexagon collar nut (1) by 1/2 turn.
CAUTION: If the nut (1) is tightened down more than 10 times during adjustment, it must be replaced again. The self-locking effect becomes too slight.
Adjust camber with eccentric screw. Adjust to specification. See WHEEL ALIGNMENT SPECIFICATIONS .
Ensure eccentric washer is correctly located between the stops (1). See Fig 2. Tighten hexagon collar nut to specification. See TORQUE SPECIFICATIONS .
Adjust toe-in. See TOE-IN ADJUSTMENT .

Fig 1: Adjusting Camber (Rear - 1 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Adjusting Camber (Rear - 2 Of 2)

Courtesy of BMW OF NORTH AMERICA, INC.