Service Function: Reset CBS Condition Based Service

A maintenance scope can be reset with the RESET CBS CONDITION BASED SERVICE  service function. Even when availability is over 80%.

The benefit of reset via the BMW diagnosis system is that the on-board date is corrected automatically.

The individual maintenance scopes are displayed in the BMW diagnosis system with service counter and availability.

• The service counter is reset by one counter on resetting. All service counters are set to "1" on new vehicles.

  The service counters are used in the Service Acceptance/Reception Module (SAM) on a scope-specific basis for controlling additional work.

• Availability is set to 100% on resetting. Availability in % is the wear value of the maintenance scope.

  The greater the availability, the longer it is to the next maintenance scope.

  0% means that the maintenance measure must be carried out.