Various Problems With CCC Following Replacement (72 30 06)
Publication date: 2009-07-10Reference number: 72 30 06
Supersedes refnos: 65 06 06
VARIOUS PROBLEMS WITH CCC FOLLOWING REPLACEMENT
TECHNICAL SERVICE BULLETIN
Reference Number(s): SI B 65 06 06, Date of Issue:
July 10, 2009
Superceded Bulletin(s): SI B65 06 06, Date of Issue:
November 2007
| BMW: | E90, E91 (3 Series) with SA 609 CCC Navigation; E60, E61 (5 Series) with SA 609 CCC Navigation; E63, E64 (6 Series) |
| GROUP: | Audio, Navigation, Monitors, Alarms, SRS |
NOTE:
This Service Information bulletin replaces SI B65 06 06 dated November 2007.
SUBJECT
Various Problems with CCC Following Replacement
SITUATION
The following symptoms may occur following the replacement of the CCC (Car Communication Computer):
- Screen display on CID (Central Information Display) off center
- No SVS (Voice Recognition System) function
- No warning gongs, including PDC (Park Distance Control)
- No audio output (all modes)
- Various other problems
CAUSE
CCC coding
PROCEDURE
Perform the following procedure for any of the above fault symptoms which were not present previously that occur following a replacement of the CCC:
- Disconnect the negative battery terminal for 30 minutes.
- Reconnect the battery terminal and code the complete vehicle per SI B09 05 01 (Coding, Individualization, Programming), Procedure E, using the latest version of Progman.
- After the coding is complete, turn the vehicle off and let the vehicle enter sleep mode (after about 3-4 minutes, buses are idle).
- Retest the system for proper functionality.
WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.
WARRANTY INFORMATION
| Defect Code | Refer to KSD |
|---|---|
| Labor Operation: | Refer to KSD |
| Labor Allowance: | Refer to KSD |