DMC Injector Scan Tool (04 30 10)

Publication date: 2011-01-12
Reference number: 04 30 10

DMC INJECTOR SCAN TOOL

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B04 30 10, Date of Issue: January 2011

BMW:	E60, E61, E71, E82, E88, E90, E92, and E93 with the N54 engine
GROUP:	Tools and Equipment

Superceded Bulletin(s): SI B04 30 10, Date of Issue: November 2010

NOTE: This Service Information bulletin supersedes SI B04 30 10 dated November 2010.

SUBJECT

DMC Injector Scan Tool

SITUATION

Distribution of the DMC scanner is complete. A limited quantity of subsidized scanners was sent to all BMW center primary locations. Additional tools may be purchased by following the directions in the Purchase Information section below. Contact the manufacturer for pricing information.

DMC Injector Scan Tool The DMC injector scan tool is used to check the N54 piezo injectors' production date and serial number. Refer to SIB13 14 10 for details.

PURCHASE INFORMATION

Additional scanners may be purchased directly from Microscan (scanner manufacturer) by using one of the two methods listed below. Use method 2 for warranty service assistance.

Follow this link and order by credit card:
shop.microscan.com/ProductDetails.asp?ProductCode=FIS%2DHS2D%2D0100G
Contact Kay Groves (Microscan) directly at:
1. Kay Groves, Inside Sales
2. Microscan, Renton, WA
3. 425-203-4926
4. kgroves@microscan.com

Microscan's part number for the scanner is FIS-HS2D-0100G.