Initialization with the Button
Initialization is performed as follows:
- Press and hold control button in slide/tilt sunroof Tilt direction
The glass panel moves into the tilt position and the sunroof shade into the ventilation position
- After approximately 15 seconds the initialization run starts in the tilt direction and stores the end position
- The slide/tilt sunroof is closed after 5 seconds in the Tilt position
- The slide/tilt sunroof is then opened and the end position stored.
NOTE:
The control button must remain pressed during the entire initialization procedure. The initialization procedure must be repeated if the button is released.
Initialization takes approximately 120 seconds.