11 11 Engine block
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Main bearing bolts (steel bolts 10.9) | N20/N26 | M10x100 | Replace screws. | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Screws on the crankcase lower section to upper part. | N20/N26 | M8x40 | 22 Nm | |
| 3AZ | Oil spray nozzles to engine block | N20/N26 | Hollow bolt | 12 Nm | |
| 4AZ | Screw plug for upper part of gear case | N20/N26 | M22x1.5 | Replace screw with sealing ring. | 50 Nm |