11 11 Engine block
TIGHTENING TORQUE SPECIFICATIONS - ENGINE BLOCK
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bearing cap to crankcase (ASA collar bolt) | S63T 0 | M11x99 | Replace bolts, screw in hand-tight | |
| Jointing torque | 20 Nm | ||||
| Angle of rotation | 115 ° | ||||
| 2AZ | Bearing cap to crankcase (ASA collar bolt 10.9) | S63T 0 | M8x70 | Replace screws. | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 55 ° | ||||
| 3AZ | Threaded support sleeves | S63T 0 | Jointing torque | 6 Nm | |
| 4AZ | Angled screw connection to crankcase | S63T 0 | M8x37 | Flange head screw 10.9 | |
| Jointing torque | 10 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 5AZ | Screw plug, gutter strip | S63T 0 | M14x1.5 | Replace gasket. | 25 Nm |
| 6AZ | Screw plug, main oil gallery rear and in V-space right | S63T 0 | M18x1.5 | Replace gasket. | 25 Nm |
| 7AZ | Oil nozzle to crankcase | S63T 0 | M12x1 | 10 Nm | |
| 8AZ | Special tool to crankcase | S63T 0 | M8x35 | 20 Nm | |
| 9AZ | Special tool to crankcase | S63T 0 | M10x35 | 40 Nm | |
| 10AZ | Special tool 11 8 930 to special tool 00 2 300 | S63T 0 | M14x35 | 160 Nm | |