52 26... Removing and installing outer fold trim

Necessary preliminary tasks:

Trim, fold, outer (pivot bearing):

Release screw (2).

Tightening torque: 52 26 25AZ .

Pull off release handle (1).

Fig 1: Pulling Outer Fold Trim Release Handle

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw.

Fig 2: Locating Outer Fold Trim Release Handle Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Only for seat backrest frame, left (60 %):

Push on locking clip (1).

Pull off ball socket.

Fig 3: Pushing Outer Fold Trim Locking Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Gas-filled strut (1) is under tension.

Lever ball socket with screwdriver on pin.

Fig 4: Pressing Gas-Filled Strut

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1).

Tightening torque: 52 26 27AZ .

Fig 5: Identifying Outer Fold Trim Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully tighten follower (2) on seat cushion frame.

Feed trim (1) out of seat mechanism.

Fig 6: Pulling Seat Mechanism Trim

Courtesy of BMW OF NORTH AMERICA, INC.