61 71 004 Adjusting windscreen washer jets

Fig 1: Identifying Tolerance Range Mark With Adhesive Tape

Courtesy of BMW OF NORTH AMERICA, INC.

Mark tolerance range (2) with adhesive tape (A=500 mm / B=200 mm).

Actuate windscreen washer system.

Contact points (1) must be in tolerance range (2).

If necessary, adjust left or right washer jet (1) by way of screw (2).

NOTE: If necessary, remove adhesive residue from windscreen.

Fill up with washer fluid.

Fig 2: Identifying Washer Jet And Screw

Courtesy of BMW OF NORTH AMERICA, INC.