31 00... Notes on repairing threads

WARNING: This page is about a different car, the 2013 BMW M3, 2012 BMW M3, and 2011 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads in engine support may be repaired with Helicoil thread inserts. Comply with the procedure described in the example.

Fig 1: Identifying Helicoil Thread

Courtesy of BMW OF NORTH AMERICA, INC.

Procedure:

Create a clean core hole; if necessary, drill out screw remnants.

Fig 2: Drilling Out Screw Remnants
Courtesy of BMW OF NORTH AMERICA, INC.
Create locating thread for Helicoil thread insert.

Fig 3: Inserting Screwdriver In Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Pick out Helicoil thread insert in accordance with the TABLE and screw into the locating thread until flush with the original thread.

Fig 4: Removing Helicoil Thread
Courtesy of BMW OF NORTH AMERICA, INC.
Break drive pin and remove.

Fig 5: Removing Break Drive Pin
Courtesy of BMW OF NORTH AMERICA, INC.