Error Message For Active Sound Design (ASD) When Programming With ISTA/P (09 01 16)

Publication date: 2016-02-01
Reference number: 09 01 16

ERROR MESSAGE FOR ACTIVE SOUND DESIGN (ASD) WHEN PROGRAMMING WITH ISTA/P

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B09 01 16, Date of Issue: February 2016

BMW:	F16 (X6); Vehicles produced up to August 9, 2015.
GROUP:	Programming/Coding Explanations

Error Message for Active Sound Design (ASD) When Programming with ISTA/P

A fault message comes up for the Active Sound Design (ASD) control unit when executing an ISTA/P measures plan.

ISTA/P Software error.

None needed.

X6 vehicles produced prior to August 2015 did not come equipped with an ASD module.

If you receive an error message for the ASD while programming, ISTA/P will suggest a special measure of the module.

Do not accept this special measure. Instead continue programming.
You will again see an error message for the ASD which can be ignored and programming will continue.

For information only