Fuel System - Repair (F30, 6-CYL RWD)

• 13 31 Electric Fuel Pump With Drive And Line
  • (00..... Lifting the vehicle using a vehicle lift)
  • 1331 Notes regarding the fuel pressure test (reference pressure: surrounding area)
  • 13 31 029 Check delivery pressure of fuel pump
    • Notes
    • REP-TAT-P-1331-05 Check fuel delivery pressure
  • 13 31 035 Removing and installing/replacing the fuel feed line
    • Notes
    • REP-TAT-P-1353-01 Remove fuel delivery line
    • REP-TAT-P-1353-02 Installing fuel delivery line
• 13 51 Injection Pump, Regulating Parts, Mixture Control
  • 13 51 017 Removing and installing high pressure pump
    • Notes
    • REP-TAT-P-1353-01 Remove high pressure pump
    • REP-TAT-P-1353-26 Prepare for the installation of the high pressure pump
    • REP-TAT-P-1353-02 Install high pressure pump
• 13 53 Injector Nozzles And Lines
  • 13 53... Cleaning the cylinder head in the area of the injectors with sandy/dusty contamination
  • 13 53 080 Remove and install/replace rail at cylinder 1-3
    • Notes
    • REP-TAT-P-1353-01 Removing the high-pressure rail of the cylinders 1 to 3
    • REP-TAT-P-1353-02 Installing the high-pressure rail at the cylinders 1 to 3
  • 13 53 081 Remove and install/replace rail at cylinder 4-6
    • Notes
    • REP-TAT-P-1353-01 Removing the high-pressure rail of the cylinders 1 to 3
    • REP-TAT-P-1353-01 Removing rail of cylinders 4 to 6
    • REP-TAT-P-1353-02 Installing the high-pressure rail at the cylinders 1 to 3
    • REP-TAT-P-1353-02 Installing the high-pressure rail of the cylinders 4 to 6
  • 13 53 082 Remove, install/replace both rails
    • Notes
    • REP-TAT-P-1353-01 Removing the high-pressure rail of the cylinders 1 to 3
    • REP-TAT-P-1353-01 Removing rail of cylinders 4 to 6
    • REP-TAT-P-1353-02 Installing the high-pressure rail at the cylinders 1 to 3
    • REP-TAT-P-1353-02 Installing the high-pressure rail of the cylinders 4 to 6
  • 13 53 180 Replace pressure line (between high pressure pumps and pressure accumulator)
    • Notes
    • REP-TAT-P-1353-01 Remove the high pressure line between the rail and the high pressure pump
    • REP-TAT-P-1353-02 Install the high-pressure line between the high-pressure rail and the high-pressure pump
  • 13 53 301 Removing and installing/replacing injector(s) of the injection system at cylinders 1-3
    • Notes
    • REP-TAT-P-1353-01 Remove the injectors for cylinders 1 to 3
    • REP-TAT-P-1353-26 Prepare the injectors for installation
    • REP-TAT-P-1353-02 Installing the injectors for the cylinders 1 to 3
    • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • 13 53 302 Removing and installing/replacing the injector(s) of the injection system cyl.4-6
    • Notes
    • REP-TAT-P-1353-01 Remove the injectors for cylinders 4 to 6
    • REP-TAT-P-1353-26 Prepare the injectors for installation
    • REP-TAT-P-1353-02 Installing the injectors for the cylinders 4 to 6
    • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • 13 53 318 Remove and install all injectors in the injection system
    • Notes
    • REP-TAT-P-1353-01 Remove the injectors for cylinders 1 to 3
    • REP-TAT-P-1353-01 Remove the injectors for cylinders 4 to 6
    • REP-TAT-P-1353-26 Prepare the injectors for installation
    • REP-TAT-P-1353-02 Installing the injectors for the cylinders 1 to 3
    • REP-TAT-P-1353-02 Installing the injectors for the cylinders 4 to 6
    • REP-TAT-P-1353-25 Reset ultra-small quantity adaptation
  • 13 53 596 Replacing the high-pressure fuel sensor (after vehicle diagnosis)
    • Notes
    • REP-TAT-P-1353-01 Remove the rail pressure sensor
    • REP-TAT-P-1353-02 Install the rail pressure sensor
• 13 54 Throttle Valve And Actuation
  • 13 54 030 Remove and install/seal throttle body
    • Notes
    • REP-TAT-P-1354-01 Removing the throttle body
    • REP-TAT-P-1354-26 Prepare the throttle body
    • REP-TAT-P-1354-02 Installing the throttle body
• 13 62 Sensor For Control Unit
  • 13 62 532 Replace coolant temperature sensor (after vehicle diagnosis) (on the crankcase)
    • Notes
    • REP-TAT-P-1362-01 Remove the coolant temperature sensor from the crankcase connecting bracket
    • REP-TAT-P-1362-02 Install the coolant temperature sensor on the connecting bracket of the crankcase
  • 13 62 538 Replace charge air temperature sensor (after vehicle diagnosis)
    • Notes
    • REP-TAT-P-1362-01 Remove charge air temperature sensor
    • REP-TAT-P-1362-02 Install charge air temperature sensor
  • 13 62 560 Remove and install/replace hot film air mass meter (after vehicle diagnosis)
    • REP-TAT-P-1362-01-F30 Removing hot film air mass meter
    • REP-TAT-P-1362-02 Installing hot film air mass meter
    • REP-TAT-P-1362-23-1 When replacing the hot film air mass meter: Resetting the adaptation value
  • 13 62 590 Replacing the boost pressure sensor (on charge air line)
    • Notes
    • REP-TAT-P-1362-01 Remove the boost pressure sensor on the charge air line
    • REP-TAT-P-1362-02 Install the boost pressure sensor on the charge air line
  • 13 62 592 Replacing boost pressure sensor (after vehicle diagnosis) (in the intake plenum)
    • Notes
    • REP-TAT-P-1362-01 Removing the charging pressure sensor from the intake plenum
    • REP-TAT-P-1362-02 Installing the charging pressure sensor on the intake plenum
  • 13 62 673 Replace temperature sensor of cylinder head
    • Notes
    • REP-TAT-P-1362-01 Remove the temperature sensor at the cylinder head
    • REP-TAT-P-1362-02 Install the temperature sensor at the cylinder head
• 13 71 Intake Silencer
  • 13 71... Removing bottom sound insulation (N47 D16/20 K/U/O/T 1)
  • 13 71 000 Remove and install intake silencer housing
    • Notes
    • REP-TAT-P-1371-01 Removing intake silencer housing
    • REP-TAT-P-1371-02 Installing intake silencer housing
  • 13 71 001 Replacing air filter element
  • 13 71 044 Removing and installing/replacing charge air line
    • Notes
    • REP-TAT-P-1371-01 Remove charge air line
    • REP-TAT-P-1371-02 Install charge air line
  • 13 71 165 Removing and installing/replacing the air duct (clean air pipe upstream of exhaust turbocharger)
    • Notes
    • REP-TAT-P-1371-01 Removing clean air pipe
    • REP-TAT-P-1371-02 Installing clean air pipe
• 13 72 Air Cleaner
  • 13 72 001 Replacing air filter insert
    • REP-TAT-P-1372-25 Replacing air filter element
• 13 90 Carbon Canister Ventilation
  • 13 90 500 Replace the tank vent valve (after vehicle diagnosis)
    • Notes
    • REP-TAT-P-1390-01 Remove tank vent valve
    • REP-TAT-P-1390-02-1 Installing the tank vent valve