Engine - Repair (F48 Fwd)

• General And Safety Information
  • 00 Danger of poisoning if oil is ingested/absorbed through the skin
  • 00 Risk of injury if oil comes into contact with eyes and skin
  • 00 Safety information for working on vehicles with automatic engine start-stop function (MSA)
  • 00 Safety instructions for handling oil
  • 1100... Handling components after flood damage
  • Engine identification
  • 1100... Overview of consumables (BMW parts catalogue)
• 11 00 Engine
  • 11 00... Engine oil change (B48AU0)
  • 11 00 039 Checking compression of all cylinders using scantool
  • 11 00 039 Checking compression of all cylinders (without scantool)
  • 11 00 050 Removing and installing engine with transmission
    • Notes
    • Repair notes for cylinder head or engine replacement
  • 11 00 300 Motor oil consumption measurement
  • 11 00 670 Secure engine in installation position
  • 11 00 895 Commissioning the oil circuit
  • Mounting engine on assembly stand (B48A)
• 11 12 Cylinder Head With Lid
  • 11 12 000 Removing and installing/sealing cylinder head cover
  • 11 12 100 Removing and installing cylinder head
  • 11 12 101 Replacing cylinder head gasket
  • 11 12 719 Grinding cylinder head lower face
  • 11 12 729 Checking cylinder head on watertightness
• 11 13 Oil Pan
  • 11 13 000 Removing and installing, sealing or replacing oil sump
• 11 14 Housing Cover
  • 11 14 005 Replacing front crankshaft seal
  • 11 14 110 Removing and installing, sealing/replacing rear timing case cover
  • 11 14 151 Replacing crankshaft seal on transmission side
• 11 15 Crankcase Ventilation
  • 11 15 510 Measuring the internal engine pressure (B48A)
• 11 16 Component Carrier
  • 11 16 550 Removing and installing alternator bracket
• 11 21 Crankshaft With Bearing
  • 11 21 001 Replacing crankshaft
  • 11 21 531 Replacing all crankshaft main bearing shells
• 11 22 Flywheel
  • 11 22 000 Removing and installing/replacing flywheel
• 11 23 Vibration Damper
  • 11 23 010 Removing and installing/replacing vibration damper
• 11 24 Connecting Rod With Bearing
  • 11 24 571 Replace all connecting rod bearings
• 11 25 Piston With Rings And Bolts
  • 11 25 000 Removing and installing or replacing all pistons
  • 11 25 671 Replacing piston rings on all pistons
• 11 27 Counterbalance Shafts
  • 11 27 030 Removing and refitting/replacing balancer shafts
• 11 28 Accessory Drive Belt
  • 11 28... Tensioning/releasing of drive belt for alternator
  • 11 28 010 Replace drive belt for alternator
  • 11 28 020 Replacing tensioning device for alternator drive belt
  • 11 28 025 Removing and installing/replacing deflecting element for drive belt (B48A, B46A)
• 11 31 Camshaft
  • 11 31... Notes for checking and adjusting the timings (B37, B38, B47, B48)
  • 11 31 005 Checking camshaft timing
  • 11 31 025 Removing and installing/replacing intake camshaft
  • 11 31 028 Removing and installing/replacing exhaust camshaft
  • 11 31 052 Replacing both timing chains
  • 11 31 090 Removing and installing/replacing chain tensioner piston
  • 11 31 505 Adjusting timing of camshaft(s)
• 11 33 Rocker/Rocker Arm With Bearing
  • 11 33 050 Removing and installing/replacing all rocker arms
  • 11 33 062 Replacing all hydraulic valve clearance compensating elements
• 11 34 Valves With Springs
  • 11 34 055 Replacing all valve springs
  • 11 34 552 Removing and installing or replacing all valves
  • 11 34 560 Replacing all valve stem seals
• 11 36 Variable Camshaft Timing Control
  • 11 36 046 Removing and installing or replacing intake and exhaust camshaft adjusters
  • 11 36 658 Removing and installing/replacing both actuators
• 11 37 VALVETRONIC
  • 11 37 005 Removing and installing/replacing eccentric shaft
  • 11 37 010 Removing and installing/replacing intermediate levers
  • 11 37 020 Removing and installing/replacing servomotor for eccentric shaft
• 11 40 Oil Pressure Check
  • 11 40 000 Checking engine oil pressure
• 11 41 Oil Pump
  • 11 41 000 Removing and installing or replacing oil/vacuum pump
  • 11 41 115 Removing and installing/replacing hydraulic valve
• 11 42 Oil Filter And Lines
  • 11 42 020 Removing and installing/replacing full-flow oil filter (B48A)
  • 11 42 200 Removing and installing/sealing or replacing oil feed line for exhaust turbocharger
  • 11 42 210 Removing and installing/sealing or replacing oil return line for exhaust turbocharger
• 11 44 Oil Cooler
  • 11 44 000 Removing and installing/replacing oil-to-water heat exchanger
• 11 51 Coolant Pump With Drive
  • 11 51 000 Removing and installing/replacing coolant pump
• 11 53 Thermostat And Engine-Mounted Coolant Lines
  • 11 53 000 Removing and installing/replacing coolant thermostat
  • 11 53 086 Removing and installing/replacing coolant feed line for exhaust turbocharger
  • 11 53 086 Removing and installing/replacing coolant return line for exhaust turbocharger
  • 11 53 590 Removing and installing/replacing the auxiliary water pump
• 11 61 Intake System
  • 11 61 050 Removing and installing intake plenum
  • 11 61 362 Removing and installing/replacing right charge-air duct
  • 11 61 365 Removing and installing/replacing left-hand charge air duct
  • 11 61 730 BMW leakage test for the air intake system
• 11 65 Turbocharger
  • 11 65 020 Removing and installing/replacing exhaust turbocharger
  • 11 65 803 Removing and installing/replacing wastegate valve controller (production date up to 06/2019)
  • 11 65 310 Remove and install or replace the blow-off valve (production date beginning 07/2019)
    • Remove the blow-off valve
    • Install blow-off valve
• 11 66 Vacuum Pump
  • 11 66 000 Removing and installing or replacing oil/vacuum pump
• 11 74 Exhaust-Gas RECIRCULATION Valve
  • 11 74... Vacuum system arrangement (M57T2TOP_SCR)
  • 11 74 559 Replace electric valve for vacuum control of water pump
• 11 78 Co Adjustment, Oxygen Sensor
  • 11 78 510 Remove and install/replace front oxygen sensor
  • 11 78 610 Remove and install/replace monitoring oxygen sensor