Fuel Supply System -- Repair (F98)

• 16 00 Draining Fuel Tank
  • 16 00 005 Draining and filling fuel tank
    • Suction the fuel tank
    • Fill fuel tank
• 16 11 Fuel Tank, Fuel Filler Pipe
  • 16 11 030 Removing and installing fuel tank
    • Remove fuel tank
    • Install fuel tank
  • 16 11 060 Removing and installing/replacing fuel filler pipe
    • Remove fuel filler pipe
    • Installing the fuel filler pipe
• 16 12 Fuel Lines, EVAP Canister
  • 16 12 010 Removing and installing or replacing carbon canister
    • Remove carbon canister (US version)
    • Install carbon canister (US version)
  • 16 12 053 Replacing purge air line, front
    • Remove the front purge air line
    • Install the front purge air line
  • 16 12 054 Replacing rear purge air line
    • Remove the rear purge air line
    • Installing the rear purge air line
  • 16 12 058 Replacing front fuel supply line
    • Remove front fuel supply line
    • Installing the front fuel supply line
  • 16 12 059 Replacing rear fuel supply line
    • Removing the fuel supply line at the rear
    • Installing the rear fuel supply line
  • 16 12 200 Removing and installing/replacing outer fuel filter (if equipped)
    • Remove the external fuel filter
    • Install the external fuel filter
• 16 13 Vacuum Leak Detection System
  • 16 13 521 Removing and installing/replacing the pressure switch for Natural Vacuum Leak Detection (NVLD)
    • Removing the pressure switch
    • Installing the pressure switch
  • 16 13 522 Removing and installing/replacing temperature sensor for Natural Vacuum Leak Detection (after vehicle diagnosis)
    • Remove temperature sensor
    • Install temperature sensor
• 16 14 Fuel Pump, Fuel Pump Control Unit
  • 16 14 065 Removing and installing/replacing dust filter for Natural Vacuum Leak Detection (NVLD)
    • Remove the dust filter
    • Install the dust filter
  • 16 14 090 Removing and installing/replacing delivery unit (vehicles without stationary heating system)
    • Removing the delivery unit (vehicles without stationary heating)
    • If delivery unit is replaced (vehicles without auxiliary heater)
    • Installing the repair cable set (in vehicles up to production date 04/2020)
    • Installing delivery unit (vehicles without stationary heating system)
  • 16 14 090 Removing and installing/replacing delivery unit (vehicles with stationary heating system)
    • Removing delivery unit (vehicles with stationary heating system)
    • Installing the repair cable set (in vehicles up to production date 04/2020)
    • Installing delivery unit (vehicles with stationary heating system)
  • 16 14 500 Removing and installing/replacing the control unit for the electric fuel pump (after vehicle diagnosis)
    • Remove the control unit for the fuel pump control electronics
    • Installing the control unit for the fuel pump control electronics
  • 16 14 650 Install repair kit delivery unit (with spare delivery unit) (vehicles with production date up to 04/2020)
    • Installing the repair wiring harness