Fuel System -- Repair (F98)

• 13 31 Fuel Supply Line, Fuel Pressure Check
  • Notes regarding the fuel pressure test (reference pressure: surrounding area)
  • 13 31 035 Removing and installing/replacing fuel supply line
    • Removing fuel delivery line
    • Installing fuel delivery line
• 13 51 Fuel Injection Pump
  • 13 51 057 Removing and installing high pressure pump (cylinders 1-3)
    • Removing the high pressure pump of cylinders 1 to 3
    • Installing the high pressure pump of cylinders 1 to 3
  • 13 51 058 Removing and installing high pressure pump (cylinder 4-6)
    • Removing the high pressure pump for cylinders 4 to 6
    • Installing the high pressure pump for cylinders 4 to 6
  • 13 51 059 Removing and installing both high pressure pumps
    • Removing both high pressure pumps
    • Installing both the high pressure pumps
• 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensors
  • 13 53... Clean the cylinder head in the area of the injectors with sandy/dusty contamination
  • 13 53 180 Replace pressure line (between high pressure pump and rail cyl. 1-3)
    • Removing the high pressure line between the high-pressure pump and the high-pressure rail for cylinders 1 to 3
    • Installing the high pressure line between the high-pressure pump and the high-pressure rail for cylinders 1 to 3
  • 13 53 185 Replace pressure line (between high pressure pump and rail cyl 4-6)
    • Removing the high pressure line between the high pressure pump and rail for cylinders 4 to 6
    • Installing the high pressure line between the high pressure pump and the rail for cylinders 4 to 6
  • 13 53 301 Removing and installing/replacing fuel injector(s) of cylinders 1-3
    • Removing the high-pressure rail with the injectors of cylinders 1 to 3
    • Preparing the injectors for installation
    • Installing the high-pressure rail with injectors of the cylinders 1 to 3
  • 13 53 302 Removing and installing/replacing the fuel injector(s) of cylinders 4-6
    • Removing the rail with injectors of cylinders 4 to 6
    • Preparing the injectors for installation
    • Installing the high-pressure rail with injectors of the cylinders 4 to 6
  • 13 53 594 Replacing fuel low-pressure sensor (after vehicle diagnosis) (fuel feed line)
    • Remove fuel low-pressure sensor
    • Installing fuel low-pressure sensor
  • 13 53 596 Replacing fuel high-pressure sensor (after vehicle diagnosis) (in rail)
    • Remove the rail pressure sensor
    • Install the rail pressure sensor
  • 13 53 719 Replacing all injectors of the injection system (after vehicle diagnosis)
    • Removing the high-pressure rail with the injectors of cylinders 1 to 3
    • Removing the rail with injectors of cylinders 4 to 6
    • Preparing the injectors for installation
    • Installing the high-pressure rail with injectors of the cylinders 4 to 6
    • Installing the high-pressure rail with injectors of the cylinders 1 to 3
• 13 54 Throttle Body
  • 13 54 030 Remove and install/seal throttle body
    • Removing the throttle body
    • Installing the throttle body
• 13 62 Engine Sensors
  • 13 62 532 Replace coolant temperature sensor (after vehicle diagnosis) (under manifold)
    • Removing the coolant temperature sensor under the collector
    • Installing the coolant temperature sensor under the manifold
  • 13 62 538 Replace charge air temperature sensor (after vehicle diagnosis)
    • Remove charge air temperature sensor
    • Install charge air temperature sensor
  • 13 62 590 Replacing the pressure sensor (after vehicle diagnosis) (before throttle valve)
    • Removing the boost pressure sensor on the charge air crossing
    • Installing the boost pressure sensor on the charging air crossing
  • 13 62 592 Replacing the pressure sensor (after vehicle diagnosis) (in intake manifold)
    • Remove the boost pressure sensor from the intake plenum
    • Installing the boost pressure sensor on the intake plenum
  • 13 62 596 Replacing the differential pressure sensor for the gasoline particulate filter (after vehicle diagnosis) (cylinders 1-3)
    • Removing the differential pressure sensor (cylinders 1 - 3)
    • Installing the differential pressure sensor (cylinders 1-3)
  • 13 62 597 Replacing differential pressure sensor for gasoline particulate filter (after vehicle diagnosis) (cylinders 4-6)
    • Removing the differential pressure sensor (cylinders 4-6)
    • Installing the differential pressure sensor (cylinders 4-6)
  • 13 62 679 Replacing oil/coolant temperature sensor (on crankcase) (after vehicle diagnosis)
    • Remove temperature sensor on crankcase
    • Install temperature sensor on the crankcase
• 13 71 Intake Silencer
  • 13 71 000 Remove and install intake filter housing
    • Remove intake silencer housing
    • Installing intake filter housing
  • 13 71 045 Remove and install/replace charge air crossing
    • Removing the charge air crossing
    • Installing the charge air crossing
  • 13 71 172 Removing and installing/replacing left air duct
    • Removing the left-hand air duct
    • Installing the left air duct
  • 13 71 173 Removing and installing/replacing the air duct on the right
    • Removing the right air duct
    • Installing right air duct
  • 13 71 182 Removing and installing/replacing the charge air pipe at cylinders 4-6
    • Removing the charge air pipe for cylinders 4 to 6
    • Install charge air pipe cylinders 4 to 6
  • 13 71 183 Removing and installing/replacing the charge air duct, cylinders 1-3
    • Removing charge air duct of cylinders 1 to 3
    • Installing charge air duct of cylinders 1 to 3
  • 13 71 184 Removing and installing/replacing charge air duct, cylinder 4-6
    • Removing the charge air duct of cylinders 4 to 6
    • Installing charge air duct of cylinders 4 to 6
  • 13 71 185 Remove and install/replace charge air duct (between charge air line and throttle valve)
    • Removing the charge air duct
    • Installing the charge air duct
  • 13 71 204 Removing and installing/replacing the clean air duct, cylinders 1-3
    • Remove clean air pipe cylinder 1-3
    • Installing the clean air pipe for cylinders 1-3
  • 13 71 205 Removing and installing/replacing clean air duct, cylinder 4-6
    • Removing clean air pipe cylinders 4-6
    • Installing the clean air pipe for cylinders 4-6
• 13 72 Engine Air Filter
  • 13 72 001 Replace air filter insert
    • Remove the air filter inserts
    • Installing air filter inserts
• 13 90 EVAP Canister Purge Valve
  • 13 90 500 Replace the tank vent valve (after vehicle diagnosis)
    • Remove tank vent valve
    • Installing the tank vent valve
  • 13 90 520 Replace tank vent line with pressure sensor (after vehicle diagnosis)
    • Removing the tank ventilation line with the pressure sensor
    • Installing the tank vent line with the pressure sensor