Electric Fuel Pump: Description

Pump is located in fuel tank, and is an integral part of the tank unit assembly, which includes the fuel gauge metering unit. Both metering unit and pump are positioned and supported by the fuel tube of the tank unit. Pump consists of a rotating turbine-type hydraulic pump directly coupled to a permanent magnet motor.
NOTE: Pump is factory crimped and cannot be disassembled for repair.
A single pole, double throw control switch is located near the oil filter and actuated by engine oil pressure. At approximately 3 psi, one electrical circuit is broken and another circuit established. Three fixed connections are provided on switch to make contact with a matching three terminal wiring connector in a splash-proof boot.