FixVault
Home › Buick › 1979 › Skyhawk Base, Automatic Trans › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Auto. A/C Systems - Automatic Climate Control › Component Replacement › Programmer › Riviera › Removal

Component Replacement: Programmer: Riviera: Removal

  1. Remove right side hush panel. Remove glove box.
  2. Disconnect electrical and vacuum connectors from programmer. Remove 3 programmer bracket, mounting screws.
  3. Detach threaded rod from output shaft of programmer (snap out of retainer).
About FixVault