FixVault
Home › Buick › 1984 › Regal T-Type › Repair and Diagnosis › External Pages › Different car › Section 8 (Wheel Alignment Specifications & Procedures) › Alignment Specifications

Alignment Specifications

WARNING: This page is about a different car, the 1984 Pontiac Phoenix, 1984 Oldsmobile Omega, 1984 Chevrolet Citation II, and 1984 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
WHEEL ALIGNMENT SPECIFICATIONS (SKYLARK)

Application Specification
Caster (Degrees) (1) + 7/8 +/- 1
Camber (Degrees) (2) 0 +/- 1/2
Toe-in (Inches) 0° +/- 2/10°
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Non-adjustable.
(2) Maximum side-to-side difference 1/2°.
WHEEL ALIGNMENT SPECIFICATIONS (CITATION)

Application Specification
Caster (Degrees) (1)
Camber (Degrees) (2) 0 +/- 1/2
Toe-in (Inches) 0 +/- 2/5
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Non-adjustable.
(2) Maximum side-to-side difference 1 1/2°.
WHEEL ALIGNMENT SPECIFICATIONS (OMEGA)

Application Specification
Caster (Degrees) 2 +/- 1/2
Camber (Degrees) 0
Toe-in (Inches) 0
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
WHEEL ALIGNMENT SPECIFICATIONS (PHOENIX)

Application Specification
Caster (Degrees) (1)
Camber (Degrees) 0 +/- 1/2
Toe-in (Inches) (2) 0 +/- 3/16
Toe-Out on Turns (Degrees)
Inner N/A
Outer N/A
(1) Non-adjustable.
(2) Maximum side-to-side difference 1/2°.
About FixVault