Chart No. 2: SPS Circuit Open (Test F)
- If less than 15 ohms were present during initial check, go to CHART NO. 2: SPS CIRCUIT SHORT (TEST N) . If more than 15 ohms were present, remove connector form cruise control servo. Measure resistance between terminals "B" and "D" of servo. If resistance is more than 25 ohms, replace cruise control servo.
- If resistance is less than 25 ohms, check for an open in Light Blue/Black wire between terminal "N" of cruise control module and terminal "D" of cruise control servo. Check for an open in Tan wire between terminal "F" of module and terminal "B" of servo.