FixVault
Home › Buick › 1992 › Roadmaster Base › Repair and Diagnosis › Body & Frame › Power Seats › Removal & Installation › Motor › Installation

Removal & Installation: Motor: Installation

  1. Install the motors (48) to the motor support bracket (47). See Figure .
    • Drill out top end of grommet, using a 3/16" drill bit.
    • Secure motors (48) to motor support bracket (47) with 3/16" rivets.
  2. Connect the electrical connector (53) to motors (48) attached. See Figure .
  3. Install the motor support bracket (47) with motors (48) attached. See Figure .
  4. Install the nut (46). See Figure .
  5. Connect the drive cables (49). See Figure .
  6. Install the front seat. See FRONT SEAT ASSEMBLY  .
About FixVault