FixVault
Home › Buick › 1992 › Skylark Base, 2D Coupe, 2.3 3 › Repair and Diagnosis › Body & Frame › Power Windows › Removal & Installation › Window Control Module › Removal

Window Control Module: Removal

  1. Remove driver's door trim panel. See DOOR TRIM PANEL  .
  2. Remove driver's door water deflector. See WATER DEFLECTOR  .
  3. Disconnect wiring connector (4). See Figure .
  4. Release tab (3) on module (2) and slide module out of bracket (1).
About FixVault