Low Coolant Indicator Test
- Disconnect 3-pin low coolant module connector located on radiator. See Figure -9. Turn ignition switch to RUN position. Using a voltmeter, ensure battery voltage is present at terminal "C" of low coolant module connector.
- If voltage is not present, check wiring and instrument panel fuse No. 20. If wiring and fuse are okay, ensure battery voltage is present at connector terminal "B".
- If voltage is not present, check wiring and bulb. If wiring and bulb are okay, connect jumper wire between terminals "A" and "B". If COOLANT LOW indicator does not illuminate, check wiring. If indicator illuminates, replace low coolant module.