FixVault

Washer Motor Does Not Operate

  1. Disconnect washer motor connector. Turn ignition switch to RUN position. Connect test light between terminals of washer motor connector. While observing test light, activate washer switch. If test light is off, go to next step. If test light is on, check for poor wiring connection at washer motor. If connection is okay, replace washer motor.
  2. Connect test light between chassis ground and Red wire terminal of washer motor connector. Activate washer switch. If test light is on, go to next step. If test light is off, check for open Red wire. If Red wire is okay, replace wiper switch.
  3. Check for open Dark Blue wire. If Dark Blue wire is okay, replace wiper motor (internal ground circuit is open).