LOW WASH FLUID Indicator On At All Times
- Disconnect washer fluid level switch connector. Turn ignition on. If LOW WASH FLUID indicator is on, go to next step. If LOW WASH FLUID indicator is not on, ensure windshield washer reservoir is full. If reservoir is full, replace level switch.
- Turn ignition off. Disconnect IPC connector C1. Check continuity between IPC connector terminal B2 (Black/White wire) and ground. If continuity is present, repair short to ground in Black/White wire. If continuity is not present, check IPC for shorted internal circuits. If internal circuits are okay, replace IPC.