FixVault
Home › Buick › 2000 › Century Custom › Repair and Diagnosis › External Pages › Different car › Section 512 (Keyless Entry System) › Repair Instructions › Remote Control Door Lock Receiver Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper trim panel from the instrument panel (IP). Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (IP) Upper .
  2. Release the door lock receiver from the IP by releasing the retainer tabs.
  3. Disconnect the electrical connector.
  4. Remove the door lock receiver.
    Fig 1: Remove IP Upper Trim Panel, Door Lock Receiver & Electrical Connector
    G01833123Courtesy of GENERAL MOTORS CORP.
About FixVault