FixVault

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Radio Antenna Module
    GM296961Courtesy of GENERAL MOTORS CORP.
  1. Install the radio antenna module to the roof beam, ensuring that the alignment tab is properly located.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the antenna module fastener.

    Tighten:  Tighten the fastener to 9 N.m (80 lb in).

  4. Connect the electrical connectors to the radio antenna module.
  5. Install the headliner. Refer to Headliner Replacement (With Sunroof) or Headliner Replacement (Without Sunroof) in Interior Trim.