FixVault
Home › Buick › 2000 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › External Pages › Different car › Section 126 (Personalization Systems) › Description and Operation › Driver Personalization › Programming Features on Vehicles Without DIC › Enter Programming

Enter Programming

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following actions in order to enter programming:

  1. Turn the ignition to RUN.
  2. Place the vehicle in PARK.
  3. Close all of the doors.
  4. Depress and hold the driver side power door lock switch during the entire personalization programming session. The doors will lock to confirm program mode.
About FixVault