Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LeSabre. However, it is still accessible from the selected car via links, so may be relevant.

Turn OFF the ignition switch.

Fig 1: View of Intake Air Temperature Sensor and Electrical Sensors

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (2) from the intake air temperature (IAT) sensor (1).

Fig 2: View of Intake Air Duct

Courtesy of GENERAL MOTORS CORP.

Grasp and, with a twisting and pulling motion, remove the IAT sensor from the intake air duct (1).