Code Enable Criteria

PCM will run diagnostic for this DTC under the following conditions:

• DTCs P0101, P0102, P0103, P0107, P0108, P0117, P0118, P0121, P0122, P0123, P0125, P0336, P1114, P1115, P1121, P1122 P1336 are not set.
• Engine speed is 1000-5000 RPM.
• Throttle angle is more than 15 percent.
• Engine load is more than 40 percent.
• Engine coolant temperature is more than 153°F (60°C).
• Maximum spark retard is less than 15 degrees.
• System voltage is more than 9 volts.
• Engine run time is more than 30 seconds.

DTC will set when PCM detects a malfunction in integrated knock sensor diagnostic circuitry which will not allow proper diagnosis of knock sensor circuit for at least one second.