Security Feedback
Security feedback feature allows verification that RKE transmitter command has been received by vehicle. Various security feedback mode indicator settings may be programmed. See SECURITY FEEDBACK MODE SETTING INDICATORS table. Security feedback feature can be customized for each RKE transmitter. To program an RKE transmitter for security feedback mode setting, perform the following procedures:
- Turn the ignition to RUN. Place the vehicle in Park. Close all of the doors. Hold driver's door lock switch down during entire procedure.
- Press TRUNK release button on RKE transmitter. Security feedback stays in current mode, verified by horn chirps.
- Press TRUNK release button on RKE transmitter. Security feedback feature changes to next mode, verified by horn chirps.
- Releasing vehicle door lock switch. Security feedback programming is terminated.
SECURITY FEEDBACK MODE SETTING INDICATORS
| Mode | Unlock Vehicle | Lock Vehicle | ||
|---|---|---|---|---|
| 0 (1) | ..... | ..... | ||
| 1 | Flash Exterior Lights | ..... | ||
| 2 | ..... | Flash Exterior Lights | ||
| 3 | Flash Exterior Lights | Flash Exterior Lights | ||
| 4 | ..... | Flash Ext. Lights & Chirp Horn | ||
| 5 | Flash Exterior Lights | Flash Ext. Lights & Chirp Horn | ||
|
||||