FixVault
Home › Buick › 2002 › Century Custom › Repair and Diagnosis › Body & Frame › Door Locks › Theft Deterrent System › Repair Instructions › Theft Deterrent Control Module Replacement › Installation Procedure

Installation Procedure

  1. Push the theft deterrent module (2), onto the lock cylinder housing (1).
    2. Fig 1: Identifying Theft Deterrent Module
    G01755440Courtesy of GENERAL MOTORS CORP.
  2. Install the theft deterrent wiring harness to the steering column harness.
  3. Connect the electrical connector.
  4. Replace the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT - ON VEHICLE in Steering Wheel and Column.
  5. Enable the SIR system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM in Restraints.
  6. Program the new theft control module. Refer to Programming Theft Deterrent System Components .
About FixVault