FixVault
Home › Buick › 2002 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Dash Integration Module Replacement › Installation Procedure

Installation Procedure

  1. Connect the electrical connectors (1).
  2. Install the DIM into the bracket.
    Fig 1: DIM And Electrical Connectors
    G01743069Courtesy of GENERAL MOTORS CORP.
  3. Install the right sound insulator.
  4. Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) , Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM)  .
About FixVault