FixVault
Home › Buick › 2002 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Rear Integration Module Replacement › Installation Procedure

Installation Procedure

  1. Install the RIM (2).
  2. Connect the RIM electrical connectors (3).
  3. Install the RIM (2) with the push pin retainers (1).
    Fig 1: RIM And Electrical Connectors
    G01743073Courtesy of GENERAL MOTORS CORP.
  4. Reposition the rear seat back insulator.
  5. Install the rear seat back.
  6. Install the rear seat cushion.
  7. Reprogram, the RIM. Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) , Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM)  .
About FixVault