FixVault
Home › Buick › 2002 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Body Control Module (BCM) Programming/RPO Configuration (RIM) › Procedure to Calibrate a Rear Integration Module (RIM)

Procedure to Calibrate a Rear Integration Module (RIM)

After replacement of the RIM, perform the following procedure to recalibrate the automatic level control.

  1. Ensure the scan tool has been updated with the latest software version.
  2. Connect a scan tool to the Data Link Connector (DLC).
  3. Turn ON the ignition, with the engine OFF.
  4. Under the CHASSIS MAIN MENU, select REAR INTEGRATION MODULE.
  5. Under the REAR INTEGRATION MODULE MAIN MENU, select RECALIBRATION.
  6. Follow the scan tool on screen instructions to recalibrate the automatic level control.
  7. Perform the vehicle personalization settings. Refer to PERSONALIZATION DESCRIPTION AND OPERATION in PERSONALIZATION .

NOTE: After programming, perform the following to avoid future misdiagnosis:
  1. Turn the ignition OFF for 10 seconds.
  2. Connect the scan tool to the Data Link Connector.
  3. Turn the ignition ON with the engine OFF.
  4. Use the scan tool in order to retrieve HISTORY DTCs from all modules.
  5. Clear all HISTORY DTCs.
About FixVault