FixVault
Home › Buick › 2002 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Dash Integration Module Replacement › Removal Procedure

Removal Procedure

  1. Before replacement, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) , Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM)  .
  2. Remove the right sound insulator.
  3. Remove the Dash Integration Module (DIM) from the bracket by releasing the tab behind the module and pulling downward.
  4. Disconnect the electrical connectors (1).
    Fig 1: Dash Integration Module (DIM) And Electrical Connectors
    G01743068Courtesy of GENERAL MOTORS CORP.
About FixVault