FixVault
Home › Buick › 2002 › LeSabre Custom, 4T65E/MN3 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Body Control System › Repair Instructions › Rear Integration Module Replacement › Removal Procedure

Removal Procedure

  1. Before replacing the RIM, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration (DIM) , Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM)  .
  2. Remove the rear seat cushion.
  3. Remove the rear seat back.
  4. Move the rear seat back insulator aside.
  5. Remove the push pin retainers (1).
  6. Disconnect the Rear Integration Module (RIM) electrical connectors (3).
  7. Remove the RIM (2).
    Fig 1: Rear Integration Module (RIM) And Electrical Connectors
    G01743072Courtesy of GENERAL MOTORS CORP.
About FixVault