FixVault
Home › Buick › 2002 › Park Avenue Base › Repair and Diagnosis (Single Page) › Body & Frame › Seats › Power Seat System › Repair Instructions › Memory Seat Control Module Replacement › Installation Procedure

Installation Procedure

  1. Install the memory seat module (1) and the bracket.
  2. Install the 2 rear fasteners to the bracket.
  3. Connect the electrical connector.
  4. Install the seat.
  5. Install the seat anchor bolts. Tighten the seat anchor bolts to 41 N.m (30 ft lbs).
  6. Install the 2 front fasteners to the bracket.
  7. Install the front track cover.
About FixVault