FixVault
Home › Buick › 2002 › Park Avenue Base › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System › Repair Instructions › Yaw Rate Sensor Replacement › Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the rear compartment trim.
  3. Remove the rear shelf trim panel.
  4. Remove the 2 yaw rate sensor mounting nuts (1).
    Fig 1: Locating Yaw Rate Sensor
    G01753130Courtesy of GENERAL MOTORS CORP.
  5. Remove the yaw rate sensor (2).
  6. Disconnect the yaw rate sensor electrical connector (3).
About FixVault