Installation Procedure
WARNING: This page is about a different car, the 2003 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector to the body control module (2).
- Install the module to the mounting bracket (1).
Slide the module upward and slightly rearward until locking tabs engage.
- Install the right closeout/insulator panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT in Instrument Panel, Gages and Console.
- Reprogram the body control module. Refer to BODY CONTROL MODULE (BCM) PROGRAMMING/RPO CONFIGURATION .