FixVault
Home › Buick › 2002 › Park Avenue Base › Repair and Diagnosis › Suspension › Electronic Suspension System - Automatic Level Control › Repair Instructions › Automatic Level Control Sensor & Bracket Replacement › Installation Procedure

Installation Procedure

  1. Install the bracket on the height sensor with four nuts.

    Tighten four nuts to 3 N.m (26 in lbs).

  2. Install the height sensor with the bracket on the vehicle with two bolts. Tighten two bolts to 11 N.m (97 in lbs).
  3. Connect the link to the height sensor actuating arm.
  4. Connect the height sensor harness clip and the connector to the vehicle.
  5. Connect the height sensor connector to the vehicle harness connector.
  6. Lower the vehicle.
  7. Adjust the height sensor. Refer to Automatic Level Control Sensor Adjustment .
About FixVault