FixVault
Home › Buick › 2002 › Regal LS › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pulley Replacement (3.1L) › Installation Procedure

Installation Procedure

CAUTION:
  • Never use a hammer to install the power steering pulley.
  • The face of the power steering pulley hub must be flush with the end of the power steering pump driveshaft.
  1. Using J 25033-C  install the power steering pump pulley to the power steering pump.
  2. Install the accessory drive belt. Refer to SPECIFICATIONS & DRIVE BELT ROUTING .
  3. Fill the power steering system. Refer to Checking and Adding Power Steering Fluid .
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
  5. Inspect the power steering system for leaks. Refer to Power Steering Fluid Leaks .
About FixVault